CZPT belt
Attributes
The carcass of this belt is manufactured from cotton/cotton cloth the two in warp and weft or terelyene/cotton cloth in warp and cotton cloth in weft
This variety of belt will show very good flexibility, exceptional trough-forming capacity and is an cost-effective solution for your conveying requirements.
Apps
- Greatest suited for conveying goods in brief distance and suited for but not restricted to conveying of powder, granules and weak abrasive components these kinds of assawdust, grain, coal and cements, and so forth.
- Running temperature: 10°C-60°C
BELT Sorts
Belt sorts include typical, oil resistant, acid and alkali resistant, cold resistant and anti-static grades
Technical Knowledge
CZPT: In accordance to ISO/FDIS 14890:1990
Overall performance at Total Thickness
Belt duration can be CZPT on ask for and the highest duration is no much more than 300 m.
Material Variety | Ply Thickness (mm) |
Nominal Tensile Power at Overall Thickness (N/mm) |
Longitudinal Elongation at Split (%) |
Longitudinal Elongation at Rated Stress (%) |
Belt Width (mm) |
CZPT Belt Duration (M) |
||||
2ply | 3ply | 4ply | 5ply | 6ply | ||||||
Terylene Cotton TC-70 | 1. | 140 | 210 | 280 | 350 | 420 | ≥10 | ≤4 | 300 ~ 1500 |
two hundred |
Cotton
CC-fifty six |
one. | 112 | 168 | 224 | 280 | 336 |
Overall performance of Cover Rubber (for CZPT Apps)
Notice: The go over rubber performance for other belt varieties like oil resistant, acid and alkali resistant, cold resistant and
anti-static belt, please refer to the corresponding belt introduction.
Cover Grade | Tensile Power | Elongation at Crack (%) ≥ |
Abrasion Loss (mm³ ) ≤ |
Adjust Rate of Tensile Strength & Elongation soon after Growing older (%) |
|
(MPa) ≥ | (Kg/cm²) ≥ | ||||
Regular Applications (L) | 15. | 150. | 350 | two hundred | -twenty five ~ +twenty five |
Abrasion Resistant (D) | eighteen. | one hundred eighty. | four hundred | one hundred | -twenty five ~ +25 |
Excessive Tear Resistant (H) | 24. | 240. | 450 | a hundred and twenty | -25 ~ +25 |
When protect rubber thickness ranging from .eight~one.60mm, it allows 15% tolerance of tensile strength. Growing older Check: 70ºC×168h. |
Adhesion-Ply to Ply
Merchandise | Canvas Ply to Canvas Ply |
Include to Canvas Ply | |
Cover Thickness .eight-one.5mm | Protect Thickness >1.5mm | ||
Average Worth of Samples (N/mm) ≥ | 3. | 2.one | two.seven |
Minimal Value of Samples (N/mm) ≥ | two.seven | one.6 | 2.2 |
The peak worth of all samples are significantly less than 20N/mm. |
We also have patten conveyor belt.
Type of Pattern:
1) Chevron conveyor belt (Raised & Sunk herringbone)
2) Spherical pit conveyor belt
three) Diamond conveyor belt
The workshop of our belt
The other products of our conveyor elements:
Could you you should send me inquiry for details?